Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Structural Steel
Open Flat Steel Plate — Specification to Be Confirmed
NOVUS · Structural Steel
Open Flat Steel Plate — Specification to Be Confirmed is intended for cutting, welding, machining or structural/equipment fabrication. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
Open Flat Steel Plate — Specification to Be Confirmed
Open Flat Steel Plate — Specification to Be Confirmed is intended for cutting, welding, machining or structural/equipment fabrication. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm product standard, grade, rolling/heat-treatment condition, thickness × width × length, tolerances, flatness, edges, surface, ultrasonic-testing requirement and cutting/machining scope.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
Steel plate is selected by product standard, grade, supplied condition, thickness, width, length, tolerances and surface quality. Pressure-equipment, low-temperature, wear-resistant or other special service must be expressly supported by the relevant material specification and design documents.
Identified ordering parameters
| Product category | Structural Steel |
|---|---|
| Product form | Steel plate |
| Catalogue standard reference | Confirm with RFQ |
| Material | Confirm with RFQ |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | Confirm with RFQ |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Structural parts, equipment components and general metal fabrication.
- Special service only when expressly covered by the material and design specifications.
Critical selection points
- Confirm product standard, grade, rolling/heat-treatment condition, thickness × width × length, tolerances, flatness, edges, surface, ultrasonic-testing requirement and cutting/machining scope.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Structural Steel
NEED A SPECIFICATION REVIEW?