Home/PE Pipe/PE80 SDR 11 Pressure Pipe
PE80 SDR 11 Pressure PipeSelect a thumbnail · 01/03

AVAILABLE TO ORDER · PE Pipe

PE80 SDR 11 Pressure Pipe

NOVUS · PE Pipe

PE80 SDR 11 Pressure Pipe is intended for buried water, gas or utility networks where the project standard permits PE. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

Supply status Project order
PriceQuoted against confirmed specifications
Contact via TelegramCall NOVUS

For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location

SELECTION SUMMARY · OVERVIEW

PE80 SDR 11 Pressure Pipe

PE80 SDR 11 Pressure Pipe is intended for buried water, gas or utility networks where the project standard permits PE. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

NOVUS selection noteConfirm the service standard, compound grade, outside diameter, SDR/wall thickness, pressure rating, temperature, colour/stripe, coil or straight length, jointing method and required approvals.
01Confirm the applicable standard

Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.

02Confirm material and dimensions

Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.

03Confirm the supply scope

Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.

NOVUS TECHNICAL DATA

Specifications, applications and product images

International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.

PE-pipe service and pressure rating are determined by compound grade, dimension series, SDR, temperature, design life and the applicable water or gas product standard. PE100 or PE80 identifies the material grade; it does not by itself establish approval for potable-water or gas service.

Identified ordering parameters

Product categoryPE Pipe
Product formPolyethylene (PE) pressure pipe
Catalogue standard referenceConfirm with RFQ
MaterialPE80
Size / wall / pressure designationSDR 11
Manufacturing / joint methodConfirm with RFQ
ConfigurationConfirm with RFQ
Design fluid, pressure and temperatureConfirm with RFQ

Typical uses (project confirmation required)

  • Project-defined buried water and utility networks.
  • Gas networks only under the applicable product standard and approval.

Critical selection points

  • Confirm the service standard, compound grade, outside diameter, SDR/wall thickness, pressure rating, temperature, colour/stripe, coil or straight length, jointing method and required approvals.

Inspection and documentation

  • Check appearance, dimensions, marking, compound batch and supplied documents against the confirmed product standard.
  • Fusion records, joint inspection and system pressure testing are included only when required by the project; responsibility must be defined in the order.

Packing and delivery

  • Protect against cuts, flattening, excessive bending, heat sources and prolonged unprotected UV exposure; keep ends clean and protected.
  • Agree coils/straight lengths, stacking, end protection, labels and transport restraint for the size, temperature and route.

Confirm with the RFQ

  1. Applicable standard, edition and project amendments
  2. Material grade, product form and required material documents
  3. Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
  4. Ends, joint, facing, coating or machining requirements
  5. Fluid, design pressure, design temperature and corrosion conditions
  6. Quantity, unit, packing, destination and required delivery date
  7. Inspection, testing, NDT, third-party witness and documentation requirements

NEED A SPECIFICATION REVIEW?

Send us your project list.

Contact SONG ↗