Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · PE Pipe Fittings
PE100/PE80 90° Butt-Fusion Elbow
NOVUS · PE Pipe Fittings
PE100/PE80 90° Butt-Fusion Elbow is intended for direction change, branching, reduction, closure or transition in a PE piping network. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
PE100/PE80 90° Butt-Fusion Elbow
PE100/PE80 90° Butt-Fusion Elbow is intended for direction change, branching, reduction, closure or transition in a PE piping network. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm service standard, PE grade, outside diameter, SDR, exact fitting type, fusion system/parameters, mating flange drilling or transition end, pressure-temperature conditions and approval requirements.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
A PE fitting must match the pipe compound, outside diameter, SDR, service standard and jointing process. Butt-fusion or electrofusion quality depends on suitable equipment, surface preparation, time/temperature parameters, restraint and traceable installation records; the fitting alone cannot assure field-joint quality.
Identified ordering parameters
| Product category | PE Pipe Fittings |
|---|---|
| Product form | PE piping fitting |
| Catalogue standard reference | Confirm with RFQ |
| Material | PE100; PE80 |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | butt fusion |
| Configuration | 90° |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Project-approved PE water, utility or gas networks.
- Transitions from PE pipework to valves, equipment or dissimilar materials.
Critical selection points
- Confirm service standard, PE grade, outside diameter, SDR, exact fitting type, fusion system/parameters, mating flange drilling or transition end, pressure-temperature conditions and approval requirements.
Inspection and documentation
- Check appearance, dimensions, marking, compound batch and supplied documents against the confirmed product standard.
- Fusion records, joint inspection and system pressure testing are included only when required by the project; responsibility must be defined in the order.
Packing and delivery
- Protect against cuts, flattening, excessive bending, heat sources and prolonged unprotected UV exposure; keep ends clean and protected.
- Agree coils/straight lengths, stacking, end protection, labels and transport restraint for the size, temperature and route.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in PE Pipe Fittings
NEED A SPECIFICATION REVIEW?