Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Flanges
ASME B16.5 Class 600 Slip-On Flange
NOVUS · Flanges
ASME B16.5 Class 600 Slip-On Flange is intended for bolted flange joints where the pipe enters the flange and is attached by fillet welds. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
ASME B16.5 Class 600 Slip-On Flange
ASME B16.5 Class 600 Slip-On Flange is intended for bolted flange joints where the pipe enters the flange and is attached by fillet welds. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm standard, size, pressure rating, material, flange bore, facing, pipe set-back, weld requirements and matching gasket/bolting.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
A slip-on flange fits over the pipe end and is attached with specified fillet welds. Fit-up clearance, pipe set-back, weld size and facing must comply with the selected standard and welding procedure; it is not a direct substitute for a weld-neck flange.
Identified ordering parameters
| Product category | Flanges |
|---|---|
| Product form | Slip-on flange |
| Catalogue standard reference | ASME B16.5 |
| Material | Confirm with RFQ |
| Size / wall / pressure designation | Class 600 |
| Manufacturing / joint method | Confirm with RFQ |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- General flanged joints where expressly permitted by the piping class.
- Bolted connection points at equipment and valves.
Critical selection points
- Confirm standard, size, pressure rating, material, flange bore, facing, pipe set-back, weld requirements and matching gasket/bolting.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Flanges
NEED A SPECIFICATION REVIEW?