Home/Carbon Steel Pipe/SCH 40 Carbon Steel Pipe Caps
SCH 40 Carbon Steel Pipe CapsSelect a thumbnail · 01/07

AVAILABLE TO ORDER · Carbon Steel Pipe

SCH 40 Carbon Steel Pipe Caps

NOVUS · Carbon Steel Pipe

SCH 40 Carbon Steel Pipe Caps is intended for conveying process or utility fluids in a specified piping system. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

Supply status Project order
PriceQuoted against confirmed specifications
Contact via TelegramCall NOVUS

For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location

SELECTION SUMMARY · OVERVIEW

SCH 40 Carbon Steel Pipe Caps

SCH 40 Carbon Steel Pipe Caps is intended for conveying process or utility fluids in a specified piping system. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

NOVUS selection noteSelect by fluid, design pressure and temperature, corrosion allowance, outside diameter, wall thickness or Schedule, end preparation and surface protection.
01Confirm the applicable standard

Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.

02Confirm material and dimensions

Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.

03Confirm the supply scope

Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.

NOVUS TECHNICAL DATA

Specifications, applications and product images

International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.

This steel pipe may be specified for process lines, utility lines or equipment connections. Pressure, temperature and corrosion suitability must be checked against the project piping class, material specification and design conditions; the catalogue name alone is not sufficient.

Identified ordering parameters

Product categoryCarbon Steel Pipe
Product formIndustrial steel pipe
Catalogue standard referenceConfirm with RFQ
Materialcarbon steel
Size / wall / pressure designationSCH 40
Manufacturing / joint methodConfirm with RFQ
ConfigurationConfirm with RFQ
Design fluid, pressure and temperatureConfirm with RFQ

Typical uses (project confirmation required)

  • Process and utility piping.
  • Equipment connections and project-defined industrial networks.

Critical selection points

  • Select by fluid, design pressure and temperature, corrosion allowance, outside diameter, wall thickness or Schedule, end preparation and surface protection.

Inspection and documentation

  • Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
  • Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.

Packing and delivery

  • Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
  • Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.

Confirm with the RFQ

  1. Applicable standard, edition and project amendments
  2. Material grade, product form and required material documents
  3. Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
  4. Ends, joint, facing, coating or machining requirements
  5. Fluid, design pressure, design temperature and corrosion conditions
  6. Quantity, unit, packing, destination and required delivery date
  7. Inspection, testing, NDT, third-party witness and documentation requirements

NEED A SPECIFICATION REVIEW?

Send us your project list.

Contact SONG ↗