Home/Pipe Fittings/Galvanized Iron Bend
Galvanized Iron BendSelect a thumbnail · 01/05

AVAILABLE TO ORDER · Pipe Fittings

Galvanized Iron Bend

NOVUS · Pipe Fittings

Galvanized Iron Bend is intended for changing the direction of a piping run. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

Supply status Project order
PriceQuoted against confirmed specifications
Contact via TelegramCall NOVUS

For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location

SELECTION SUMMARY · OVERVIEW

Galvanized Iron Bend

Galvanized Iron Bend is intended for changing the direction of a piping run. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

NOVUS selection noteConfirm standard, grade, nominal size, wall thickness/Schedule, angle, radius, ends/joint and corrosion allowance.
01Confirm the applicable standard

Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.

02Confirm material and dimensions

Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.

03Confirm the supply scope

Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.

NOVUS TECHNICAL DATA

Specifications, applications and product images

International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.

An elbow changes pipe direction through a defined angle and radius. Short-radius, long-radius, butt-weld, socket-weld and threaded designs are not interchangeable by nominal size alone; centre-to-end dimensions, wall thickness and ends must be checked.

Identified ordering parameters

Product categoryPipe Fittings
Product formPipe elbow
Catalogue standard referenceConfirm with RFQ
MaterialConfirm with RFQ
Size / wall / pressure designationConfirm with RFQ
Manufacturing / joint methodgalvanised (process to be confirmed)
ConfigurationConfirm with RFQ
Design fluid, pressure and temperatureConfirm with RFQ

Typical uses (project confirmation required)

  • Pipeline changes of direction and equipment connections.
  • Runs requiring a defined angle and flow path.

Critical selection points

  • Confirm standard, grade, nominal size, wall thickness/Schedule, angle, radius, ends/joint and corrosion allowance.

Inspection and documentation

  • Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
  • Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.

Packing and delivery

  • Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
  • Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.

Confirm with the RFQ

  1. Applicable standard, edition and project amendments
  2. Material grade, product form and required material documents
  3. Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
  4. Ends, joint, facing, coating or machining requirements
  5. Fluid, design pressure, design temperature and corrosion conditions
  6. Quantity, unit, packing, destination and required delivery date
  7. Inspection, testing, NDT, third-party witness and documentation requirements

NEED A SPECIFICATION REVIEW?

Send us your project list.

Contact SONG ↗