Home/Pipe Fittings/Galvanized Grooved Fitting
Galvanized Grooved FittingSelect a thumbnail · 01/05

AVAILABLE TO ORDER · Pipe Fittings

Galvanized Grooved Fitting

NOVUS · Pipe Fittings

Galvanized Grooved Fitting is intended for mechanical pipe joints using grooved ends, a coupling housing and a gasket. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

Supply status Project order
PriceQuoted against confirmed specifications
Contact via TelegramCall NOVUS

For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location

SELECTION SUMMARY · OVERVIEW

Galvanized Grooved Fitting

Galvanized Grooved Fitting is intended for mechanical pipe joints using grooved ends, a coupling housing and a gasket. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

NOVUS selection noteConfirm the system series, pipe outside diameter, groove dimensions, rigid/flexible type, pressure rating, gasket compound, temperature and required approval.
01Confirm the applicable standard

Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.

02Confirm material and dimensions

Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.

03Confirm the supply scope

Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.

NOVUS TECHNICAL DATA

Specifications, applications and product images

International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.

A grooved system works as an assembly of the pipe-end groove, coupling housing, bolts and gasket. Rigid/flexible construction, groove geometry and gasket compound must match the system, fluid and temperature.

Identified ordering parameters

Product categoryPipe Fittings
Product formGrooved mechanical fitting
Catalogue standard referenceConfirm with RFQ
MaterialConfirm with RFQ
Size / wall / pressure designationConfirm with RFQ
Manufacturing / joint methodgrooved; galvanised (process to be confirmed)
ConfigurationConfirm with RFQ
Design fluid, pressure and temperatureConfirm with RFQ

Typical uses (project confirmation required)

  • Fire, utility and project-approved mechanically joined networks.
  • Runs requiring rapid assembly or a specified amount of angular movement.

Critical selection points

  • Confirm the system series, pipe outside diameter, groove dimensions, rigid/flexible type, pressure rating, gasket compound, temperature and required approval.

Inspection and documentation

  • Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
  • Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.

Packing and delivery

  • Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
  • Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.

Confirm with the RFQ

  1. Applicable standard, edition and project amendments
  2. Material grade, product form and required material documents
  3. Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
  4. Ends, joint, facing, coating or machining requirements
  5. Fluid, design pressure, design temperature and corrosion conditions
  6. Quantity, unit, packing, destination and required delivery date
  7. Inspection, testing, NDT, third-party witness and documentation requirements

NEED A SPECIFICATION REVIEW?

Send us your project list.

Contact SONG ↗