Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Pipe Fittings
Carbon Steel Butt-Weld Tee
NOVUS · Pipe Fittings
Carbon Steel Butt-Weld Tee is intended for connecting a run pipe to one or more branches. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
Carbon Steel Butt-Weld Tee
Carbon Steel Butt-Weld Tee is intended for connecting a run pipe to one or more branches. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm run-by-branch size, equal/reducing configuration, standard, material, wall thickness, ends, centre dimensions and reinforcement requirement.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
A branch fitting forms an equal or reducing outlet. Run and branch sizes, centre-to-end dimensions, wall thickness, joint type and any branch reinforcement must agree with the piping design.
Identified ordering parameters
| Product category | Pipe Fittings |
|---|---|
| Product form | Tee, cross or branch fitting |
| Catalogue standard reference | Confirm with RFQ |
| Material | carbon steel |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | butt-weld |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Flow division, collection or instrument/equipment branches.
- Equal or reducing piping connections.
Critical selection points
- Confirm run-by-branch size, equal/reducing configuration, standard, material, wall thickness, ends, centre dimensions and reinforcement requirement.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Pipe Fittings
NEED A SPECIFICATION REVIEW?