Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Carbon Steel Pipe
ASME SA-179 Seamless Carbon Steel Boiler Tube
NOVUS · Carbon Steel Pipe
ASME SA-179 Seamless Carbon Steel Boiler Tube is intended for heat-transfer surfaces and tube bundles in boilers, superheaters or heat exchangers. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
ASME SA-179 Seamless Carbon Steel Boiler Tube
ASME SA-179 Seamless Carbon Steel Boiler Tube is intended for heat-transfer surfaces and tube bundles in boilers, superheaters or heat exchangers. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm grade, outside diameter, wall thickness, length, manufacturing and heat-treatment condition, tube ends, design conditions and test/document requirements.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
Material selection and allowable service for boiler or heat-exchanger tubes depend on the material standard, equipment design code, design temperature and pressure, corrosive environment and supplied condition. A material standard does not replace equipment design calculations.
Identified ordering parameters
| Product category | Carbon Steel Pipe |
|---|---|
| Product form | Boiler or heat-exchanger tube |
| Catalogue standard reference | ASME SA-179 |
| Material | carbon steel |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | seamless |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Boiler heating surfaces, superheater and reheater sections.
- Heat-exchanger, condenser and project-defined tube bundles.
Critical selection points
- Confirm grade, outside diameter, wall thickness, length, manufacturing and heat-treatment condition, tube ends, design conditions and test/document requirements.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Carbon Steel Pipe
NEED A SPECIFICATION REVIEW?