Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Carbon Steel Pipe
Seamless Mechanical Tube for Machining
NOVUS · Carbon Steel Pipe
Seamless Mechanical Tube for Machining is intended for machined components, sleeves, rollers or other mechanical parts. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
Seamless Mechanical Tube for Machining
Seamless Mechanical Tube for Machining is intended for machined components, sleeves, rollers or other mechanical parts. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm grade, manufacturing and heat-treatment condition, outside diameter, bore/wall thickness, length, tolerances, straightness, surface, NDT requirement and machining allowance.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
Mechanical tube is selected by material, supplied condition, outside diameter, bore or wall thickness, dimensional tolerances, straightness and machining allowance. It must not automatically be treated as pressure pipe or a load-bearing structural tube unless the purchase specification states this and the relevant verification is completed.
Identified ordering parameters
| Product category | Carbon Steel Pipe |
|---|---|
| Product form | Mechanical steel tube |
| Catalogue standard reference | Confirm with RFQ |
| Material | Confirm with RFQ |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | seamless |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Turned, bored or otherwise machined parts.
- Sleeves, rollers, bushes and tubular components in equipment manufacture.
Critical selection points
- Confirm grade, manufacturing and heat-treatment condition, outside diameter, bore/wall thickness, length, tolerances, straightness, surface, NDT requirement and machining allowance.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Carbon Steel Pipe
NEED A SPECIFICATION REVIEW?