Home/Carbon Steel Pipe/Deep-Well Screen Pipe
Deep-Well Screen PipeSelect a thumbnail · 01/05

AVAILABLE TO ORDER · Carbon Steel Pipe

Deep-Well Screen Pipe

NOVUS · Carbon Steel Pipe

Deep-Well Screen Pipe is intended for fluid intake and particle control in water or process wells. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

Supply status Project order
PriceQuoted against confirmed specifications
Contact via TelegramCall NOVUS

For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location

SELECTION SUMMARY · OVERVIEW

Deep-Well Screen Pipe

Deep-Well Screen Pipe is intended for fluid intake and particle control in water or process wells. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.

NOVUS selection noteConfirm base-pipe material and standard, outside diameter, wall thickness, slot/aperture, open area, screen construction, connection, length and downhole loads.
01Confirm the applicable standard

Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.

02Confirm material and dimensions

Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.

03Confirm the supply scope

Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.

NOVUS TECHNICAL DATA

Specifications, applications and product images

International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.

Well-screen performance depends on base pipe, slot or aperture size, open area, filter construction, connection and downhole loads. Slot size must be selected from formation or gravel-pack data, not from pipe diameter alone.

Identified ordering parameters

Product categoryCarbon Steel Pipe
Product formWell screen
Catalogue standard referenceConfirm with RFQ
MaterialConfirm with RFQ
Size / wall / pressure designationConfirm with RFQ
Manufacturing / joint methodConfirm with RFQ
ConfigurationConfirm with RFQ
Design fluid, pressure and temperatureConfirm with RFQ

Typical uses (project confirmation required)

  • Water, dewatering and process-intake wells.
  • Filtration and sand-control sections designed for the formation.

Critical selection points

  • Confirm base-pipe material and standard, outside diameter, wall thickness, slot/aperture, open area, screen construction, connection, length and downhole loads.

Inspection and documentation

  • Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
  • Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.

Packing and delivery

  • Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
  • Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.

Confirm with the RFQ

  1. Applicable standard, edition and project amendments
  2. Material grade, product form and required material documents
  3. Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
  4. Ends, joint, facing, coating or machining requirements
  5. Fluid, design pressure, design temperature and corrosion conditions
  6. Quantity, unit, packing, destination and required delivery date
  7. Inspection, testing, NDT, third-party witness and documentation requirements

NEED A SPECIFICATION REVIEW?

Send us your project list.

Contact SONG ↗