Check the required API, ASTM, ASME, DIN, EN, JIS, GB or GOST standard and edition against the project documents.
NOVUSORDERING CATALOG
AVAILABLE TO ORDER · Carbon Steel Pipe
EN 10219 Cold-Formed Welded Structural Hollow Section
NOVUS · Carbon Steel Pipe
EN 10219 Cold-Formed Welded Structural Hollow Section is intended for structural frames, supports or mechanical members. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
Supply status Project order
PriceQuoted against confirmed specifications
For an RFQ, provide: applicable standard · material grade · dimensions · pressure class · quantity · delivery location
SELECTION SUMMARY · OVERVIEW
EN 10219 Cold-Formed Welded Structural Hollow Section
EN 10219 Cold-Formed Welded Structural Hollow Section is intended for structural frames, supports or mechanical members. Final suitability is subject to the project conditions, applicable standard and mutually confirmed order documents.
NOVUS selection noteConfirm section shape and size, wall thickness, grade, length, tolerances, weld requirements, surface condition and structural design basis.
Specify the material grade, nominal size, wall thickness or pressure class, connection and surface treatment.
Provide the quantity, packing, inspection and documentation requirements, destination and required delivery date.
NOVUS TECHNICAL DATA
Specifications, applications and product images
International standard designations, grades, dimensions and units are retained. Final supply parameters are governed by the NOVUS documents confirmed by both parties.
Structural tube is selected by section size, wall thickness, grade, dimensional tolerances and structural design requirements. It must not be treated as pressure pipe unless the purchase specification states this and the required verification is completed.
Identified ordering parameters
| Product category | Carbon Steel Pipe |
|---|---|
| Product form | Structural steel tube |
| Catalogue standard reference | EN 10219 |
| Material | Confirm with RFQ |
| Size / wall / pressure designation | Confirm with RFQ |
| Manufacturing / joint method | welded |
| Configuration | Confirm with RFQ |
| Design fluid, pressure and temperature | Confirm with RFQ |
Typical uses (project confirmation required)
- Building and industrial structural members.
- Equipment frames, columns, beams and supports.
Critical selection points
- Confirm section shape and size, wall thickness, grade, length, tolerances, weld requirements, surface condition and structural design basis.
Inspection and documentation
- Check appearance, dimensions, marking, quantity and documents against the mutually confirmed purchase specification.
- Chemical, mechanical, pressure/leak, NDT, PMI or third-party inspection is performed only when required by the applicable standard or order; none should be assumed by default.
Packing and delivery
- Agree moisture, corrosion, impact and end protection for the product geometry, mass, finish and transport route. A timber case or fixed container tonnage is not assumed.
- Confirm labels, quantities, bundling/pallet method, lifting points and destination requirements in the order.
Confirm with the RFQ
- Applicable standard, edition and project amendments
- Material grade, product form and required material documents
- Applicable NPS/DN/OD, wall/Schedule/SDR and Class/PN data
- Ends, joint, facing, coating or machining requirements
- Fluid, design pressure, design temperature and corrosion conditions
- Quantity, unit, packing, destination and required delivery date
- Inspection, testing, NDT, third-party witness and documentation requirements
RELATED PRODUCTS
More in Carbon Steel Pipe
NEED A SPECIFICATION REVIEW?